I cannot find the recipe in the software?
It may happen that, despite the best efforts, the recipe software database does not contain a necessary color. In this case, assistance is provided by the colorists of Multichem. Our experts answer the questions referred in the shortest possible time. For this purpose, please send your request directly from the recipe software. Watch the clip showing how to do it.
YouTube
|
Kar-Bon software |
What is the difference between "base" and "acrylic"?
What is the difference between CP99 base system and CP88 acrylic system?
Base lacquer - CP99, is single-component 1K lacquer, which provides the color for our car. Only the dedicated thinner is needed to prepare the ready-to-spray mixture. Base lacquers require clear coat to protect them. Our base products consist of Kar-Bon and waterborne Aqua 2G. Base lacquers provide coatings of various types of the visual effects like Pearls, Metallics, Xirallic.
Acrylic lacquers, in most cases, are in two-component version, e.g. Acryl CP 88. In order to harden them, the activator, so-called hardener, is required. Acrylic lacquers do not need to be covered with clearcoat. This is the most important difference. The acrylic lacquers disadvantage is impossibility of obtaining the coating with the effects, as it occurs in the case with base lacquers.
|
Kar-Bon software |
How much paint is needed to paint a car?
The function in Kar-Bon recipe software helps to specify how much paint is needed to cover individual items, as well as the entire car. In Kar-Bon software, once you have selected specific colour, the button "QUANTITY ADJUSTMENT" appears, after clicking, one can select the specific items of the car body to be covered, and the software will show how much lacquer is needed. We have to select different sizes of the car. See the short film. Calculator helps to select the amount of paint only approximately. The individual lacquer conditions need to be considered.
YouTube
Photo
|
Kar-Bon software |
Gloss converter B03
Due to its application, we can get satin surface resistant to scratches. Just check the box "GLOSS CONVERTER" in Kar-Bon recipe software to obtain the recipe for 1K base lacquer, which we can paint without using clearcoat as the protection coat. There is no need to use clearcoat on top. Base lacquer that is associated with the addition suits very well for the applications, e.g. to lacquer the engine compartment.
YouTube
Photo
PDF
|
Kar-Bon software |
What Candy colourants are used for?
Candy offers a wide range of motorcycle colors and special visual effects. In order to use Candy in the recipe software, select it in the settings. Watch the attached clip to know more.
YouTube
PDF
|
Kar-Bon software |
Colour additives - Stardust
Color additives allow to recreate even the most original coatings with the visual effects.
They can change color depending on the angle of observation, allowing to obtain the surprising optical effects.
YouTube
Photo
|
Kar-Bon software |
003 matt resin (CP 88 acrylic system)
Matt resin serves as a binder to the acrylic lacquers in two-component systems. Due to its application we can get dull or semi-matt surface. Addition of the matt resin reduces strength of covering.
YouTube
Photo
PDF
|
Kar-Bon software |
What is Reactive Primer?
More precisely it is called as the wash primer, as a product we labeled it with CP 590 symbol. It protects metal surfaces against corrosion. Wash primer is applied directly on metal surfaces. This is a two-component product, where fully diluted phosphoric acid acts as the activator. As a result of contact with iron, we obtain iron phosphate film, forming an effective barrier against the corrosive nature of the external and internal factors. This type of primer is usually applied with very thin layers (with a thickness of several micrometers), therefore, it required to be covered with other acrylic or epoxy primer.
More about CP 590
PDF
|
Product application |
What is Epoxy Primer?
Epoxy primer (CP 395; CP 394), due to its excellent adhesion to metal and strong cross-linking, is an excellent barrier to water. It is used as the priming layer for metal surfaces protecting from corrosion. The disadvantage of epoxy primer is long curing time.
More about CP 395
|
Product application |
Why do "fish-eyes" occur after coating?
Fish Eyes – known also as a silicone contamination, poor wetting, saucering, craters, pits are the result of contamination on the lacquered surface. Before painting, be sure that all surfaces are completely clean. Assure that all activities with using the products containing silicones are performed away from the lacquer premises. Remove damaged lacquer and apply lacquer again
Contaminants on painted surfaces
PDF
|
Product application |
Recommended hardeners
The technical data sheets (TDS) of products helps to get basic information about recommended hardeners for each product type.
The table with recommended hardeners is posted below.
Check our website to find any product information you need. Watch a short video showing how easily you can find information about the application of products PROFIX.
Documents: MSDS and TDS
YouTube
PDF
|
Product application |
Which thinner I should use?
The technical data sheets of the products contains the recommended thinners for each product type. The following product information is provided with the file containg the table allowing to specify which diluent should be used. Additional information can be found on the following website. Watch a short clip showing how easily you can find the information about application of the products on www.multichem.pl
Documents
YouTube
|
Product application |
Bumper CP 582 - application
Bumper is a one-component structural lacquer dedicated for repairs and renovation of plastic components such as bumpers, wing mirrors and side skirts.
We recommend to perform a test spray to verify necessity of application plastic additive for strength covering.
YouTube
|
Product application |
How much is the mixing system?
We make every effort to assure that our offers take into account the individual needs of the customers, because each time we prepare a customized offer.
In order to obtain the offer, please contact our regional representatives or directly with our sales department at the company's headquarters, phone no: 61 893 37 31
Contact details
|
Product application |
Which kind of clearcoat should be used ?
Such a decision depends on a place of a car and technique of application of clearcoat we want to use. If in doubt, contact our technician, who provides his knowledge and experience. Please write to: ml@multichem.pl or call 607 745 049
Below we provide the comparative tables - to compare the parameters of our products. Additional information can be found on the following website. See a short film showing how easily you can find the information about application of the products on www.multichem.pl
YouTube
|
Product application |
What kind of primer should we select?
We make every effort to assure that our offers take into account the individual needs of the customers, because each time we prepare a tailor-made offer.
In order to obtain the offer, please contact our regional representatives or directly with our sales department at the company's headquarters, phone no: 61 893 37 31
Contact details
YouTube
|
Product application |
Mudguard priming
The following clip shows how to apply CP 590 reactive primer and CP 345 acrylic primer.
YouTube
|
Product application |
After what time clearcoat should be applied?
Clearcoats are applied in most cases by using the wet-on-wet technique, i.e. on the clean, non-sanded surface of 1K base lacquer (which can be wiped with an anti-static cloth). After applying the last layer of base lacquer, wait approx. 10-15 minutes. This is the time necessary for proper coating deposition. After that, just finish your work by applying clearcoat.
|
Product application |
Can I use a base thinner for acrylic lacquer?
For base coat it is recommended to use dedicated thinner. The use of other thinners will result in loss of product warranty. However more important are the consequences. The use of acrylic thinner is associated with prolongated drying time and changed orientation of pigment grains in the coating. In other words, do not be surprised if you get completely different color with decreased adhesion to the substrate.
|
Product application |
RAL Colors
RAL is a popular and frequently used color card.
Sometimes we need to show some things in RAL system. Now you can do it in a simple way by using our online RAL Stencil.
If necessary, you can save a selected color as a PDF file.
Please, do not treat these samples as printed RAL color standards.
The presented colors are only similar color image of each color in the RAL system.
Sample colors can vary depending on your monitor settings
See on YT how it works
RAL Colors
YouTube
|
Product application |