CP 385

CP 385

WET-ON-WET primer 2K HS 4:1

CP 385 is a product designed for the most effective use of wet-on-wet methods combined with basecoats. Its biggest benefits include excellent paint flow properties, resulting in a perfectly smooth surface for basecoat or topcoat or direct gloss products application. Both of these advantages make work much easier and, most importantly, shorter. CP 385 primer can be applied to bare sheet metal or original OE primed parts as the product it features protective and sealing properties that effectively inhibit corrosion occurring. The product is available in 1-Litre tins.

Available colors:
  • Product benefits: Excellent paint flow Extended opening time 24 hours Can be de-nibbed Ready for wet-on-wet application Corrosion protection
  • Spill: 1.00l

Specification

Industry use

Agricultural and construction machinery
WET-ON-WET APPLICATION
Forklift trucks and hoists
EXCELLENT PAINT FLOW
Commercial vehicles and machinery
EXTENDED OPENING TIME 24 HOURS
Buses and truck tractors
CORROSION PROTECTION
Technical machinery and equipment
CAN BE DE-NIBBED
WET-ON-WET
One coat followed by basecoat application taking note of evaporation time between layers
SPRAY VISCOSITY
21-25 sec. DIN Flow Cup 4 mm
RECOMMENDED SIZES FOR PAINT STRAINER
190 μm
PAINT EFFICIENCY
10-12 m2/l
POT LIFE
1 hrs
DRY FILM THICKNESS
1 coat - 20-30 μm
MINIMUM SHELF LIFE
CP 385: 24 months in originally sealed packaging CP 282/ CP 285/ CP 286: 12 months in originally sealed packaging
VOC
2004/42/WE IIB(c) (540) 517

Application

SUBSTRATE PREPARATION
Abrade substrate using a red
P300-400 abrasive pad by hand
or P320 sanding disc using orbital
sander. Remove dust particles before
cleaning substrate with CP 015. After
the substrate is clean and dry apply
CP 385 one layer only preferrable. If
further layers are required, take note
of the recommended evaporation
time between coats and bake or
airdry before de-nibbing and applying
topcoat
MIXING RATIO
4:1
100 parts of CP 385
25 parts of hardener CP 282/
CP 285/ CP 286
40-50% of thinner CP 040/
CP 070/ CP 055/ CP 075
SPRAY GUN SETTINGS
Wet-on-wet method: nozzle size
1.2-1.4 mm, HVLP/RP
Operating pressure: 1.8-2.0 bar
APPLICATION
1 full coat. In case of incomplete
coverage, another coat can be
applied
EVAPORATION TIME AFTER APPLICATION
25-30 min after coating at
20°C and 65% relative humidity
From 30 min after application
up to 24 hrs

Related products

CP 075 - 2K very slow thinner

  • Spill: 1.00l

CP 070 - 2K slow thinner

  • Spill: 1.00l

CP 055 - Multi-purpose thinner

  • Spill: 1.00l / 5.00l

CP 040 - Thinner 2K

  • Spill: 0.50l / 1.00l / 5.00l

CP 015 - Silicone remover

  • Spill: 1.00l / 5.00l

CP 285 - Hardener MS

  • Spill: 0.50l / 2.50l

CP 282 - Hardener MS fast

  • Spill: 0.50l / 2.50l

CP 286 - Hardener MS slow

  • Spill: 0.50l / 2.50l

Sign up for our newsletter

Get a head start with access to unique information about our latest paint products.

Products added for comparison: 1 PRODUCTS.COMPARE Clean