
CP 375
Acrylic primer SWIFT 2K HS 4:1
CP 375 SWIFT acrylic primer is a perfect product suitable for rapid repairs on small surfaces. It can be applied to many types of substrates, e.g. old paint coatings, epoxy and reactive primers, directly to steel, galvanised steel, aluminium or GRP. Its big advantage is very short drying time - 5 minutes at 60°C and 1 hour at 20°C. CP 375 is characterised by: excellent flow, anti-corrosive sealing properties and the ability to remove by sanding inclusions as part of wet-on-wet method. This primer is available in 1 and 3.5-Litre tins.
Available colors:
- Product benefits: Very good adhesion Excellent paint flow
- Spill: 1.00l / 3.50l
Specification
Industry use
VERY SHORT DRYING TIME
VERY GOOD ADHESION
WET-ON-WET APPLICATION
CORROSION PROTECTION
EXCELLENT PAINT FLOW
One coat followed by basecoat or
direct gloss application taking note
of evaporation time between layers
24-26 sec. DIN Flow Cup 4mm
12-16 sec. DIN Flow Cup 4mm
190 μm
8-10 m2/L
1 h
40-50
P800->P1000
P400->P500
CP 375: 24 months in originally
sealed packaging
CP 282/ CP 285/ CP 286:
12 months in originally sealed
packaging
2004/42/WE IIB(c) (540) 540
Application
Abrade the substrate, using appropriate grade of abrasive. Once abrade, clean the substrate with silicone remover CP 015. After the substrate is clean and dry, apply the required coats of CP 375 taking note of evaporation time between layers
4:1 100 parts of CP 375 25 parts of hardener CP 282/ CP 285/ CP 286 10 % of thinner CP 040/ CP 070/ CP 055/ CP 075 As part of wet-on-wet method 30-40 % of thinner CP 040/ CP 070/ CP 055/ CP 075
Nozzle size: 1.6-1.8 mm; Operating pressure: 1.8-2.0 bar Wet-on-wet method: nozzle 1.2-1.4 mm, Operating pressure: HVLP/RP 1.8-2.0 bar
2 full coats
5 min after application of 1st and 2nd coat at 20°C and 65% relative humidity. Evaporation continues until a matt surface is visible
Drying times at 20°C and 65% relative humidity: - dust dryness: 5 min (2 coats) - before sanding: 1 hrs Drying times at 60°C and 65% relative humidity: - before sanding 5 min
Related products
MSDS
TDS
Comments
- Mixer start-up time approx. 15 minutes (do not exceed 15 minutes).
- All tools and equipment used with this product must be approved for waterborne paint.
- Recommended storage temperature is 15°C to 25°C (do not expose to temperatures below 5°C also during transport).