CP 390

CP 390

Plastic primer 1K

CP 390 primer is a single-component, ready-to-use product for priming plastic parts.It is an adhesion promoter which features insulating properties. CP 390 primer is easy to apply and has a short drying time. Note: The agent does not improve adhesion to PE polyethylene or PTFE teflon. The product is available in 0.5 and 1-Litre tins.

  • Product benefits: Short drying time Easy application Efficient Ready to use No sanding required
  • Spill: 0.50 l / 1.00 l

Specification

Industry use

Agricultural and construction machinery
SHORT DRYING TIME
Forklift trucks and hoists
READY TO USE
Commercial vehicles and machinery
EASY APPLICATION
Buses and truck tractors
NO SANDING REQUIRED
Technical machinery and equipment
EFFICIENT
SPRAY VISCOSITY
10-12 sek DIN Flow Cup 4mm
RECOMMENDED SIZES FOR PAINT STRAINER
190 μm
PAINT EFFICIENCY
10-12 m2/l
POT LIFE
Product ready for spraying
DRY FILM THICKNESS
1 coat - 10 μm
MINIMUM SHELF LIFE
CP 390: 24 months in originally sealed packaging

Application

SUBSTRATE PREPARATION
The surface should be degreased,
abraded (grey non-woven abrasive
P1200), degreased again and
washed with CP 011 water
remover. Before application
of CP 390, CP 012 antistatic
remover needs to be applied
MIXING RATIO
Ready-to-spray product, does not
need to be mixed with hardener
or thinner
SPRAY GUN SETTINGS
Nozzle size: 1.2-1.4 mm;
Operating pressure: HVLP/RP 1.8-2.0 bar
APPLICATION
1-2 coats.
2-3 min evaporation time
between coats
EVAPORATION TIME AFTER APPLICATION
20-30 min after coating at
20°C and 65% relative humidity

Related products

CP 012 - Antistatic cleaner

  • Spill: 0.50 l / 1.00 l / 5.00 l

CP 011 - Water-based cleaner

  • Spill: 5.00 l

Sign up for our newsletter

Get a head start with access to unique information about our latest paint products.

Products added for comparison: 1 PRODUCTS.COMPARE Clean