CP 390
Plastic primer 1K
CP 390 primer is a single-component, ready-to-use product for priming plastic parts.It is an adhesion promoter which features insulating properties. CP 390 primer is easy to apply and has a short drying time. Note: The agent does not improve adhesion to PE polyethylene or PTFE teflon. The product is available in 0.5 and 1-Litre tins.
Available colors:
- Product benefits: Short drying time Easy application Efficient Ready to use No sanding required
- Packaging (liters): 0.5, 1
Specification
SPRAY VISCOSITY
10-12 sek DIN Flow Cup 4mm
RECOMMENDED SIZES FOR PAINT STRAINER
190 μm
PAINT EFFICIENCY
10-12 m2/l
POT LIFE
Product ready for spraying
DRY FILM THICKNESS
1 coat - 10 μm
MINIMUM SHELF LIFE
CP 390: 24 months in originally sealed packaging
Application
SUBSTRATE PREPARATION
The surface should be degreased, abraded (grey non-woven abrasive P1200), degreased again and washed with CP 011 water remover. Before application of CP 390, CP 012 antistatic remover needs to be applied
MIXING RATIO
Ready-to-spray product, does not need to be mixed with hardener or thinner
SPRAY GUN SETTINGS
Nozzle size: 1.2-1.4 mm; Operating pressure: HVLP/RP 1.8-2.0 bar
APPLICATION
1-2 coats. 2-3 min evaporation time between coats
EVAPORATION TIME AFTER APPLICATION
20-30 min after coating at 20°C and 65% relative humidity
Related products
CP 012 - Antistatic cleaner
- Performance: Depending on the color
- Packaging (liters): 0.5, 1
-
Available colors:
CP 011 - Water-based cleaner
- Packaging (liters): 0.5, 1
-
Available colors:
MSDS AR
Sign up for our newsletter
Get a head start with access to unique information about our latest paint products.
