CP 363

CP 363

Podkład Multisealer 2K HS 4:1

CP 363 is a perfect primer that isolates and promotes adhesion, allowing old paintwork to be repainted quickly without sanding. The primer can be applied wet-on-wet and, thanks to its properties, gives the paint to be applied a high gloss and protects against corrosion. CP 363 can be tinted with acrylic and water-based systems up to 5%.

  • Product benefits: Very good adhesion Sanding of old coatings not required Potential colouring
  • Spill: 0.80 l

Specification

Industry use

Agricultural and construction machinery
SANDING OF OLD COATINGS NOT REQUIRED
Forklift trucks and hoists
VERY GOOD ADHESION
Commercial vehicles and machinery
READY FOR “WET-ON-WET” APPLICATION
Buses and truck tractors
CORROSION PROTECTION
Technical machinery and equipment
POTENTIAL COLOURING
WET-ON-WET
Only one coat required for adhesion, before applying the top coat. application up to 1 hour, film thickness 20-30 μm
SPRAY VISCOSITY
15-17 sec. DIN Flow Cup 4 mm
RECOMMENDED SIZES FOR PAINT STRAINER
125-190 μm
PAINT EFFICIENCY
8-9 m2/l
POT LIFE
1 hrs
DRY FILM THICKNESS
1 coat - 10-20 μm
MINIMUM SHELF LIFE
CP 363: 24 months in originally sealed packaging CP 282/ CP 285/ CP 286: 12 months in originally sealed packaging
VOC
2004/42/WE IIB(c) (540) 540

Application

SUBSTRATE PREPARATION
No abrasion required on stable
previously painted substrates, but
for added adhesion abrade only on
leading edges using a grey P1200
abrasive pad by hand. Remove dust
particles before cleaning substrate
with CP 015. After the substrate is
clean and dry apply CP 363 one layer
only allowing substrate to airdry (max
1 hour) before applying basecoat or
direct gloss topcoat
MIXING RATIO
4:1
100 parts of CP 363
25 parts of hardener CP 282/ CP 285/ CP 286
30 parts of thinner CP 040/ CP 070/ CP 055/
CP 075.
Tinting up to 5% with: Acryl, LV Cryl, Aqua 2G
SPRAY GUN SETTINGS
Nozzle size: 1.4-1.6 mm;
Operating pressure: HVLP/RP
1.8-2.0 bar
APPLICATION
1 coat
(full coat)
EVAPORATION TIME AFTER APPLICATION
5 min after coating at 20°C and
65% relative humidity
DRYING
Drying times at 20°C and
65% relative humidity:
- dust dryness: 15 min

Related products

CP 075 - 2K very slow thinner

  • Spill: 1.00 l

CP 070 - 2K slow thinner

  • Spill: 1.00 l

CP 055 - Multi-purpose thinner

  • Spill: 1.00 l / 5.00 l

CP 040 - Thinner 2K

  • Spill: 0.50 l / 1.00 l / 5.00 l

CP 015 - Silicone remover

  • Spill: 1.00 l / 5.00 l

CP 285 - Hardener MS

  • Spill: 0.50 l / 2.50 l

CP 282 - Hardener MS fast

  • Spill: 0.50 l / 2.50 l

CP 286 - Hardener MS slow

  • Spill: 0.50 l / 2.50 l

Sign up for our newsletter

Get a head start with access to unique information about our latest paint products.

Products added for comparison: 1 PRODUCTS.COMPARE Clean