
CP 363
Podkład Multisealer 2K HS 4:1
CP 363 is a perfect primer that isolates and promotes adhesion, allowing old paintwork to be repainted quickly without sanding. The primer can be applied wet-on-wet and, thanks to its properties, gives the paint to be applied a high gloss and protects against corrosion. CP 363 can be tinted with acrylic and water-based systems up to 5%.
- Product benefits: Very good adhesion Sanding of old coatings not required Potential colouring
- Spill: 0.80 l
Specification
Industry use
SANDING OF OLD
COATINGS NOT
REQUIRED
VERY GOOD
ADHESION
READY FOR
“WET-ON-WET”
APPLICATION
CORROSION
PROTECTION
POTENTIAL
COLOURING
Only one coat required for
adhesion, before applying the top
coat. application up to 1 hour,
film thickness 20-30 μm
15-17 sec. DIN Flow Cup 4 mm
125-190 μm
8-9 m2/l
1 hrs
1 coat - 10-20 μm
CP 363: 24 months in originally
sealed packaging
CP 282/ CP 285/ CP 286:
12 months in originally sealed
packaging
2004/42/WE IIB(c) (540) 540
Application
No abrasion required on stable previously painted substrates, but for added adhesion abrade only on leading edges using a grey P1200 abrasive pad by hand. Remove dust particles before cleaning substrate with CP 015. After the substrate is clean and dry apply CP 363 one layer only allowing substrate to airdry (max 1 hour) before applying basecoat or direct gloss topcoat
4:1 100 parts of CP 363 25 parts of hardener CP 282/ CP 285/ CP 286 30 parts of thinner CP 040/ CP 070/ CP 055/ CP 075. Tinting up to 5% with: Acryl, LV Cryl, Aqua 2G
Nozzle size: 1.4-1.6 mm; Operating pressure: HVLP/RP 1.8-2.0 bar
1 coat (full coat)
5 min after coating at 20°C and 65% relative humidity
Drying times at 20°C and 65% relative humidity: - dust dryness: 15 min