
CP 335
Metallic polyester putty
CP 335 Metallic is a putty containing a high proportion of aluminium dust, which increases its resistance to elevated temperatures (up to approximately 90°C) and is therefore used for large surfaces exposed to heat or temperature changes (e.g. engine bonnet). The product allows large cavities to be filled and guarantees excellent adhesion, thus making it suitable for application on parts exposed to vibration. CP 335 Metallic is also distinguished for its high elasticity.
Available colors:
- Product benefits: Very good adhesion High covering power Contains aluminium particles Distributes high temperatures
- Spill: 1.00 l / 2.00 l
Specification
Industry use
VERY GOOD
ADHESION
CONTAINS
ALUMINIUM
PARTICLES
HIGH COVERING
POWER
DISTRIBUTES HIGH
TEMPERATURES
5-6 min
12 months in originally sealed
packaging
2004/42/WE IIB(b) (250) 45
Application
The product is applied to a previously sanded and cleaned substrate. Old coatings should be removed. The most effective method is application on an epoxy primer CP 394. Do not apply putty on top of reactive primer
100 parts of CP 333 Hardener: • < 10°C - 3-3.5% • 10-20°C - 2-2.5% • > 20°C - 11.5%
Application in several thin coats. After each of these, the product should be cured
The product must be mixed before and after adding the hardener
Drying times at 20°C and 65% relative humidity: - 20-30 min
~8-12 min, do not exceed 80°C
Coarse (dry): P100-P120 Finishing (dry): P120-P240